Pacific Marine & Industrial Logo
Pacific Marine & Industrial®       
 MANUFACTURING ◊ DISTRIBUTION ◊ SERVICE
 
Contact Information    Search Site  ◊  info@PacificMarine.net
 
 

How PM&I Can Help Prevent Delays

Specification Sheets:

Viton - G

General Information:
Viton G is a peroxide cured fluorocarbon rubber based on the Viton GF polymer from DuPont-Dow Elastomers.  It has an excellent resistance toward concentrated acids, even better than Viton B.
Typical Applications:
High temperature oil applications
Concentrated inorganic acids (Conc. Sulphuric acid up to 125 C)
Not for steam / water high temperature applications.
Typical Properties:
Hardness 82 Shore A
Tensile Strength 15 MPa
Elongation at break 220 percent
Not food approved
Maximum continuous temperature 200 C or 130 C when water / steam is present
Property Overview:
The greater the distance from the middle the better.
General view in relation to other materials.


Home ] Up ] EPDM - Industrial Heat Exchanger Gasket ] NBR - FDA Heat Exchanger Gasket ] NBR - Industrial Heat Exchanger Gasket ] [ Viton G Heat Exchanger Gasket ] Heat Exchanger Gasket Storage Instruction ]

   
California ◊ Florida ◊ Shanghai ◊ Germany
Lagos Nigeria ◊ Valparaiso Chile ◊ Dubai UAE
Trusted Since 1985
   
      World Wide Community Servicec  Project List PM&I
  
Pacific Marine & Industrial is
a registered service mark of:
  
Quality Pacific Manufacturing, Inc.
Copyright 1985-2017
 All Rights Reserved