Zinc Swage Sleeves

ITEM	A	B	C	D	CRIMPS	HOLE#
	(wire") (wire mm)
Z0753-0001	1/16" 1.5 mm	0.169"	0.250"	0.372"	2	1
Z0753-0002	3/32" 2.5 mm	0.224"	0.370"	0.400"	3	2
Z0753-0003	1/8" 3.0 mm	0.327"	0.492"	0.554"	3	3
Z0753-0004	5/32" 4.0 mm	0.369"	0.592"	0.606"	3	4
Z0753-0005	3/16" 5.0 mm	0.450"	0.672"	0.940"	3	5
Z0753-0006	7/32" 5.5 mm	0.460"	0.720"	0.860"	3	N/A
Z0753-0007	1/4" 6.0 mm	0.515"	0.809"	1.110"	3	1
Z0753-0009	5/16" 8.0 mm	0.668"	1.020"	1.051"	3	HYDRAULIC
Z0753-0010	3/8" 9.0 mm	0.728"	1.113"	1.236"	3	HYDRAULIC
Z0753-0013	1/2" 12.0 mm	0.955"	1.471"	1.892"	3	HYDRAULIC
NOTE: FOR 1/16" - 1/8", USE E0113-0300. FOR 1/16" - 3/16", USE E0113-0600. FOR 1/4" USE E0113-0700.

California ◊ Florida ◊ Shanghai ◊ Germany

Lagos Nigeria ◊ Valparaiso Chile ◊ Dubai UAE

Trusted Since 1985

Pacific Marine & Industrial is
a registered service mark of:

Quality Pacific Manufacturing, Inc.