Commercial Sewage Lift Station Pumps

Equivalent to Pentair NPG/PG 200

Pentair NPG/PG 200

Store marine sewage for later disposal

Pump out through SCP-1000 Macerator Pump

Storage tanks provided with pump and controls or obtained locally.

Optional float switch package for automatic operation.

Equivalent to Pentair NPG/PG 200 Non Submersible Grinder Pump

This is the highest quality macerator pump built.

Specifications:

Silicon Bronze Cast

14" length (without motor and coupling)

3" inlet and 1 1/4" outlet

Cutting Blades:

17-4 PH Stainless Steel (special hardened material) Blades and Cutters

One stationary and 2 rotating blades reduce solids to between 1/8" and 1/16"

The oil lubricated duplex ball thrust bearing is held in an adjustable cap so that the axial cutter and

cutter ring axial clearance can be adjusted from the outside without the use of shims.

Shaft Seal:

Sealed by a forced oil lubricated mechanical seal.

Seal Flush System:

Allows pressurized water to flush the pump seal cavity via a solenoid valve during operation.

Motor and Coupling:

Flexible coupling with one of the following

2 HP Motor at 3450 RPM (145TC TEFC)

1 HP Motor at 1725 RPM (145TC TEFC)

California ◊ Florida ◊ Shanghai ◊ Germany

Lagos Nigeria ◊ Valparaiso Chile ◊ Dubai UAE

Trusted Since 1985

Pacific Marine & Industrial is
a registered service mark of:

Quality Pacific Manufacturing, Inc.