PM&I: Pumps: Electric Pumps: SCP 1000 Macerator Pump

Pacific Marine & Industrial

Manufacturing & Distribution: Marine, Industrial & Defense

Info@PacificMarine.net ◊ EnEspanol@PacificMarine.net ◊

SCP 1000 Macerator Pump Sewage Macerator Pump SCP 1000


Pump Terminology

SCP-1000 Macerator Pump

SCP 1000 Pump Diagram and Parts	SCP 1000 Pump Performance

This is the highest quality macerator pump built.

Specifications:
Silicon Bronze Cast
14" length (without motor and coupling)
3" inlet and 1 1/4" outlet

Cutting Blades:
17-4 PH Stainless Steel (special hardened material) Blades and Cutters
One stationary and 2 rotating blades reduce solids to between 1/8" and 1/16"

The oil lubricated duplex ball thrust bearing is held in an adjustable cap so that the axial cutter and
cutter ring axial clearance can be adjusted from the outside without the use of shims.

Shaft Seal:
Sealed by a forced oil lubricated mechanical seal.

Seal Flush System:
Allows pressurized water to flush the pump seal cavity via a solenoid valve during operation.

Motor and Coupling:
Flexible coupling with one of the following
2 HP Motor at 3450 RPM (145TC TEFC)
1 HP Motor at 1725 RPM (145TC TEFC)

California ◊ Florida ◊ Shanghai ◊ Germany

Lagos Nigeria ◊ Valparaiso Chile ◊ Dubai UAE

Trusted Since 1985

Pacific Marine & Industrial is
a registered service mark of:

Quality Pacific Manufacturing, Inc.

SCP 1000 Macerator Pump