PM&I: Pipe Repair Products: Under Pressure Pipe Repair Kits: Up to 60 pis pressure:

PACIFIC MARINE & INDUSTRIAL

Engineering Department Email:

Permanent In Place Pipe Repair Products
Under Pressure Pipe Repair Kits

PM&I: Under Pressure Pipe Repair Kit: Up to 60 PSI: Repair Pipe while still in operation. www.pacificmarine.net

PM&I: Pipe Repair Products: Pipe Repair Kits: Under Pressure: Any pipe size and any pipe material

Once Cured:

For pressure up to 300 psi constant and

and up to 250 degree F constant

Kit Number	Pipe Size	Roll Size
UP520	1/2 - 1 inch	2" x 5' (5.08cm x 1.524m)
UP930	1 1/4 - 2 inch	3" x 9' (7.62cm x 2.743m)
UP415	2 1/2 - 4 inch	4" x 15' (10.16cm x 4.572m)
UP430	4 1/2 - 6 inch	4" x 30' (10.16cm x 9.144m)
UP650	6 1/2 - 10 inch**	6" x 50' (15.24cm x 15.24m)
**For larger pipe sizes or bulk orders contact Pacific Marine and Industrial

Description

The Under Pressure Repair System was specifically designed for under pressure repair applications on copper, steel, stainless steel, PVC, FRP, clay, concrete, rubber, and more. By combining the original syntho-glass product, with the extremely chemically resistant syntho-steel and unique pressure sealing rubber tape, this offers the geometric flexibility to repair joints, tees, couplings, and pin holes. This complete system simplifies the application process and is prepackaged to accommodate pipes up to 10 inches in diameter. Larger repair applications can be engineered to meet your requirements.

Kit Contents

• Step-by-Step Instructions

• Sanding Cloth

• Solvent Cleaning Wipe

• Protective Gloves

• Syntho-Steel Putty

• Pressure Sealing

Rubber Tape

• Syntho-Glass

• Compression Film

Typical Applications

• Under pressure leaks

• Leaking joints

• Live pinhole leaks

• Dripping lines

• Emergency repair

• Potable water lines

Benefits

• No shutdown necessary

• Ready to use

• Repair of pipes under pressure up to 60 PSI (4.1 BAR)

• Heat resistant

• Effective, time-saving

• No mixing and no mess

• Sets rock hard

• NSF61 approved

Physical Properties

Mechanical Properties

Resistance Temperature to Heat: 250°F (121°C)

Tensile Strength: 39,000 PSI (269 MPa)

Resistance Temperature to Cold: -50°F (-46°C)

Lap Shear Strength: 900 PSI (6.2 MPa)

Gasoline and Oil: No Effect

Flexural Strength: 26,100 PSI (180 MPa)

Alcohol: No Effect

Dielectric Strength: 16,000 Volts

Water: No Effect

Potassium Sulfate: No Effect

Sulfuric Acid >75%: No Effect

High Concentration Mineral Acid: No Effect

High Concentration Alkali: No Effect

Max Repair Pressure: 60 PSI (4.1 BAR)

Max Pressure Cured: 300 PSI (20.6 BAR)

Max Repair Temperature: 250°F (121°C)

This catalog page contains:

pipe repair kits, industrial pipe repair, marine damage control kits, steel pipe repair, copper pipe repair, stainless steel pipe repair, pvc pipe repair, fpr pipe repair, clay pipe repair, concrete pipe repair, rubber pipe repair, pipe repair, pressurized pipe repair, non pressure pipe repair, syntho glass pipe repair, syntho glass, synthoglass, syntho glass kit, syntho steel, syntho steel putty, permanent pipe repair, syntho plug,

SINCE 1985