Packing
2003
PTFE
With Aramid Corners |
| |
|
|
|
|
|
Sizes: |
| Sold by the
pound in the following sizes: |
| 1/8", 3/16",
1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4", 7/8", 1" |
| |
| Service: |
| Designed for high pressure
reciprocating pumps, medium speed centrifugal shafts and valve
stems. Especially formulated for severe service involving high
pressure like those commonly found in reciprocating applications. It
can be used for general service against water, steam, gases, solvents,
mild acids, alkalies, chemical slurries and most abrasive liquids.
The packing will not stain in pulp and paper mill applications. |
| |
| Construction: |
| Interlock braid construction,
interweaving aramid fibers on the corners and pure PTFE filaments in the
body, so as to prevent extrusion and to improve resistance in higher
pressure applications. Each aramid fiber is individually coated with
PTFE suspensoid and treated with a break-in lubricant. |
| |
| Service Limits: |
| pH range 3-11 / Temperature 500 F
(260 C) / Shaft Speed 1970 FPM |
|
