|
Sewage Lift Station |
 |
|
|
|
Store sewage for later disposal |
|
Pump out through SCP-1000 Macerator Pump |
|
Storage tanks provided with pump and controls or obtained locally. |
|
Optional float switch package for automatic operation. |
|
|
|
Typical / Example Installation Drawing |
|
|
|
SCP-1000 Macerator Pump |
|
Pump Diagram and
Parts |
Pump
Performance |
|
|
|
This is the highest quality macerator pump
built. |
|
|
|
Specifications: |
|
Silicon Bronze Cast |
|
14" length (without motor and coupling) |
|
3" inlet and 1 1/4" outlet |
|
|
|
Cutting Blades: |
|
17-4 PH Stainless Steel (special hardened material)
Blades and Cutters |
|
One stationary and 2 rotating blades reduce solids to between 1/8" and
1/16" |
|
|
|
The oil lubricated duplex ball thrust bearing is held in an adjustable cap
so that the axial cutter and |
|
cutter ring axial clearance can be adjusted from the outside without the
use of shims. |
|
|
|
Shaft Seal: |
|
Sealed by a forced oil lubricated mechanical seal. |
|
|
|
Seal Flush System: |
|
Allows pressurized water to flush the pump seal cavity via a solenoid
valve during operation. |
|
|
|
Motor and Coupling: |
|
Flexible coupling with one of the following |
|
2 HP Motor at 3450 RPM (145TC TEFC) |
|
1 HP Motor at 1725 RPM (145TC TEFC) |
