Pacific Marine & Industrial Logo
Pacific Marine & Industrial®       
 MANUFACTURING ◊ DISTRIBUTION ◊ SERVICE
 
Info@PacificMarine.net ◊ EnEspanol@PacificMarine.net      
 
 
How PM&I Can Help Prevent Delays
  
Free Classified Equipment Ads: Global & Comprehensive
   
Purchase ONLINE Select Products Only
  
 

Portable Hydraulic Winch Hoist

Hydraulic HY1D

Portable Hydraulic Winch - Hoist HY1D
   
Purchase ONLINE Light Duty and Portable Winch Hoist
   
HY1D Portable Hydraulic Winch - Hoist Drawing
   
Information Needed to Quote Hydraulic Hoist and Hydraulic Winches 
   
How to Size a Winch or Hoist
   
Portable Hydraulic Winch Hoist HY1D / Up to 3,000 lbs. Pull Maximum with Double Line

Features
• 1,500-lb single-line or 3,000-lb double-line lift (if you double line then speed is 1/2)
• Worm gear reduction for positive load holding
• Rugged construction
• Hydraulic Power
• High-capacity cable drum
• Frictionless bearings
• Full Power Reversible
• Cable tensioner for better cable tracking

Pull rolling loads up to 30,000 lbs
Multiple-story construction site work
Long-lift applications
Tower erection and maintenance
Easily portable from job to job

Construction Features:
• Heavy-duty angle base drilled for six 1/2" bolts (9/16" mounting holes) with no welding required
• Fully sealed aluminum housings, with precision-cut gears, run in an oil bath
• Stress-proof drum shaft
• Frictionless bearings

Power:
• High torque rotary hydraulic motor
• 1/2" - 14 NPTF hydraulic connections
• 2 GPM @ 900 psi minimum pump capacity
• 2,250 maximum psi

Typical System Operation: 12GPM and 1500 psi
• 17 FPM: no load drum speed
• 14 FPM: 1,000 lbs. - single line lift
• 10 FPM: 1500 lbs. - double line lift

Minimum System Operation: 2GPM and 900 psi
• 5 1/2 FPM: no load drum speed
• 4 1/2 FPM: 1,500 lbs. - single line lift
• 4 FPM: 1500 lbs. - double line lift

Lifting Capacity
• 1500 lbs. - Layers 1 and 2
• 1275 lbs. - Layer 3
• 900 lbs. - Full drum

Pulling Capacity–Rolling Load:
HY1D winch-hoists are rated at the vertical lifting capacity.  The chart below represents the weight of a rolling load that may be pulled up a given incline. This chart is for reference only. All capacities are reduced to allow for nominal friction factors.

Incline and Max Load Weight (lbs.) (single line)
• 0% – (0°) = 30,000
• 10% – (6°) = 10,000
• 20% – (11°) = 5,000
• 40% – (22°) = 2,600
• 60% – (31°) = 1,900
• 80% – (39°) = 1,600
• 100% – (45°) = 1,400

Speeds:
• 25 FPM: 600 lbs – single-line lift
• 15 FPM: 1,250 lbs – single-line lift
• 7.5 FPM: 2,500 lbs – double-line lift
Note: All speeds are based on one layer of cable on drum.

Drum Storage:
• 1/8" – 1,000'
• 1/4" – 250'
• 3/16" – 450'
• 5/16" – 150'
For best results, use the minimum amount of cable required for application. Maintain four wraps of cable on the drum at all times. Cable sold separately. Length and size must be specified at time of order.

Cable Strength:
• Safe working load is 20% of breaking strength
• Top-quality galvanized cable available in the following breaking strengths:
1/8" – 2,000 lbs  / 1/4" – 7,000 lbs / 3/16" – 4,200 lbs / 5/16" – 9,800 lbs

Duty Cycle:
• 25% – 15 min/hr when operating at full load

Shipping Weight: 60 lbs

Factory-Installed Options (Email PM&I for Quotes)
• Clutch
• Alternative Drums
   
Other Related Products

       
Industrial Marine Capstan Marine Cranes Lifting Spreader Beams and Bars
Marine Capstans of All Types Marine Cranes of All Types Lifting Frames and Bars
Above, Semi Thru and Thru Deck Davit, I Beam, Jib, Etc. Made Per Project Requirements
    
Rope Fairleads - Swivel Fairlead Block and Sheaves Roller Fairleads 
Rope Fairleads Blocks and Sheaves Roller Fairleads 
Synthetic Rope and Wire Rope 1, 3, 4 and Multi Roller
    

Home ] Up ] Industrial Hydraulic Winches and Hoists ] [ Portable Hyraulic Winch Hoist HY1D ]

   
Join PM&I's Email Newsletter List
 
Free Classified Equipment Ads: Global & Comprehensive
  
California ◊ Florida ◊ Shanghai ◊ Germany
Lagos Nigeria ◊ Valparaiso Chile ◊ Dubai UAE
Trusted Since 1985
 
   
PM&I Link'd In  PM&I World Wide Community Service  PM&I Partial Client List
  
Pacific Marine & Industrial is
a registered service mark of:
  
Quality Pacific Manufacturing, Inc.
Copyright 1985-2021
 All Rights Reserved