Pacific Marine & Industrial Logo
Pacific Marine & Industrial®       
 MANUFACTURING ◊ DISTRIBUTION ◊ SERVICE
 
Contact Information    Search Site  ◊  info@PacificMarine.net
 
 

How PM&I Can Help Prevent Delays

Manual Chain Hoists

 manual chain hoist

1/4 to 10 Tons Capacity

   

Features:

Standard lift is 10 ft (3 m). Hand chain drop is 2 ft (0.5 m) less than lift. Additional lifts available

   

Overload limiting device to prevent lifting loads beyond rated capacity (Except 1/4 ton [250 kg] unit)

   

High strength, grade 80 alloy steel load chain with galvanized finish for corrosion resistance

   

Hooks are alloy steel, heat treated and equipped with hook latches and inspection points

   

Dual pawl Weston-style brake with two brake friction discs provides four braking surfaces

  

Series II Manual Chain Hoist meets or exceeds international standards, including ASME B30.16

    

OPTIONS

Choose a hand geared chain trolley or manual push trolley (1/2 ton - 5 ton capacity),

which both allow for low headroom.

You can also install our hoists into your existing equipment.

 

MODEL

CAPACITY
TON [KG]

FALLS

CHAIN PULL ² 
LBS. [N]

OVERHAUL RATIO ³

HEADROOM
INCH [MM]

WEIGHT**
LBS. [KG]

RMII-250

1/4 [250]

1

53 [235]

17

11 [280]

14 [6.4]

RMII-500

1/2 [500]

1

54 [240]

33

13.6 [345]

25 [11.3]

RMII-1000

1 [1000]

1

57 [250]

53

14.8 [376]

29 [13]

RMII-1500

1.5 [1500]

1

60 [265]

78

17.4 [442]

40 [17.8]

RMII-2000

2 [2000]

1

76 [335]

90

18.5 [470]

45 [20.2]

RMII-3000

3 [3000]

1

84 [372]

106

>21.6 [548]

78 [35]

RMII-5000

5 [5000]

2

81 [360]

197

27.1 [688]

91 [41.3]

RMII-7500

7.5 [7500]

3

84 [372]

296

27.1 [688]

137 [62]

RMII-10000

10 [10000]

4

84 [372]

394

30.1 [765]

173 [78.5]

Note: Reference Technical Guide for additional dimensional data 
² Effort required to lift rated load. 
³ Ft [m] of hand chain movement required for 1ft [m] of lift.
** Note: Weights shown are for models with 10 ft. (3m) of lift


Home ] Up ] Electric Chain Hoists ] [ Manual Chain Hoists ] Lever Chain Hoists ]

   
California ◊ Florida ◊ Shanghai ◊ Germany
Lagos Nigeria ◊ Valparaiso Chile ◊ Dubai UAE
Trusted Since 1985
   
      World Wide Community Servicec  Project List PM&I
  
Pacific Marine & Industrial is
a registered service mark of:
  
Quality Pacific Manufacturing, Inc.
Copyright 1985-2017
 All Rights Reserved