Seal Plate (Replaces 22211, ALL except Rev. 4) (Replaces 22211, ALL
except Rev. 3)
1
22251 22267
12
Bearing Frame (replaces 22212 ALL) Note 2
1
22266
13
Gasket
1
22265
14
5/16”-18 x 1 ½” Hex Head Cap Screw
6
22214
15
¼”-20 x ½” Socket Head Cap Screw
3
22215
16
Not Used
17
Axial Cutter
1
22217
18
5/16”-18 x 1” Hex Head Cap Screw
4
22218
19
Radial Cutter
1
22219
20
Impeller Washer
1
22220
21
¼”-20 x 5/8” Flat Head Screw
1
22221
22
Suction Head
1
22222
23
Cutter Ring
1
22223
24
O-Ring
1
22224
25
Spring Pin
1
22225
26
Impeller, 17-4 (replaces 22226 ALL)
1
22253
27
Volute (Replaces 22227 ALL except Rev. 3) (Rev. 3)
1
22268 22252
28
Not Used
29
O-Ring
1
22229
30
Mechanical Seal Kit (Seal Head and Seal Seat)
1
22200-2
31
¼” NPT Hex Head Plug
4
22231
32
O-Ring, Bearing Cap
1
22232
33
Ball Bearing *Obsolete* See 48
34
¼”-20 x 1” Socket Head Cap Screw
2
22234
35
Bearing Locknut
1
22235
36
Oil Seal
1
22236
37
Discharge Nozzle
1
22237
38
Coupling Flange, 7/8”
1
22238
39
Coupling Sleeve
1
22239
40-42
Not Used
43
Bushing, Shaft
1
22243
44
Sight Glass, Oil Cavity, Brass (SCP 1000)
1
22244
45
¾” NPT Brass Plug (SCP-1000)
2
22245
46
Vent Breather
1
22246
47
O-ring, Shaft (Part of seal kit 22200)
1
22247
48
Ball Bearing (Horizontal & Vertical Mount Replaces 22233 ALL)
1
22248
49
Discharge Nozzle O-Ring
1
22249
50
Rebuild Kit
1
22250-2
51-53
Not Used
54
Seal Flush Nozzle (Not Shown) (Rev.3 ONLY)
1
22254
55-58
Not Used
59
Motor, Electric, 2 HP (Multi-Voltage) Motor, Electric, 1HP
(Multi-Voltage)
1
21460 21430
60
Oil, Macerator, 1 Qt.
1
22260
61
Gauge, Oil Level (Vertical Mount Only)
1
22261 & 22262
●All parts listed are interchangeable with all models of
macerator pumps sold except where noted.
●If Bearing Frame #22212 (integral discharge nozzle) is
replaced with Bearing Frame # 22266 (removable discharge
nozzle), then the Volute # 22253 and the Discharge nozzle #
22237 must also be replaced.
●Internal Sleeve Bushing tool #22263 and Mechanical Seal tool
#22264 are required when replacing the Mechanical Seal.
