| Utility I Beam
Cranes and Hoists |
 |
|
|
|
Model 800 AB (115 VAC) |
|
Model 80-12 (12 Volt Battery) |
|
Model HAC 36 (3 ton - double line hoist) |
|
Model HDC48 (3 ton - double line hoist) |
|
|
|
Drawing of I Beam Hoist |
|
|
|
Features: |
|
115 Volt brake motor |
|
Worm gear reduction for positive load holding |
|
Dynamic braking for instant stopping |
|
Low headroom: 15" single line / 19" double line |
|
Trolley built to beam size: 4" to 15" structural I beams |
|
Hoist complete with cable hook and block for 20' lifts |
|
Upper and lower adjustable limit switch. |
|
|
|
Speeds: |
|
30 feet per minute - no load |
|
25 feet per minute - 500 lbs. / single line lift |
|
20 feet per minute - 1,000 lbs. / single line lift |
|
10 feet per minute - 2,000 lbs. / double line lift |
|
|
|
Lifting Capacity: |
|
1,000 lbs - single line - up to 40 feet of 1/4" cable (1-2 layers) |
|
850 lbs. - single line - up to 65 feet of 1/4" cable (3 layers) |
|
600 lbs. - single line - up to 250 feet of 1/4" cable (full drum) |
|
|
|
Duty Cycle: |
|
25% - 15 minutes per hour constant operation |
|
|
|
Drum Storage: |
|
Unit is provided with 42 feet of 1/4" cable standard. |
|
If application needs longer cable order custom without lower limit switch. |
|
** For best results, use the minimum amount of cable required |
|
1/8" wire - 1,000 feet |
|
3/16" wire - 450 feet |
|
1/4" wire - 250 feet |
|
5/16" wire - 150 feet |
|
|
|
Power:
|
|
Universal 18,500 RPM reversible 1.25 HP brake motor (no load speed) |
|
15' power cord plugs into any 115 volt AC grounded outlet |
|
6 amp no load |
|
14 amp full load |
|
10 foot pendant |
|
|
|
Shipping Weight:
|
|
133 pounds
|
|
|
|
Factory Installed Options: |
|
230 volt |
|
12 Volt DC (model 80-12) |
|
3 ton hoist (model HAC 36) |
|
Lug mount trolley |
|
Motorized trolley |
|
Upper limit switch only |
