PM&I: Catalog of Aircraft Securing Products: Marine Ship or Vessel Helicopter or Aircraft Securing: NAVSEA Drawing 803-1916300

PACIFIC MARINE & INDUSTRIAL

Engineering Department Email:

Helicopter or Aircraft Tie Down Flush Mounted Shipboard and Platform Use Aluminum or Steel Deck

Type 17 and 18	Installed	Type 1 and 14

Helicopter or Aircraft Tie Down
Primarily US and Other Navy Application
and also merchant ship, vessel and platform

Per NAVSEA Drawing 803-1916300

For use on:
Naval Ship, Yacht, Boat, Commercial Ship, Ocean Platform

With or Without Drain Holes

Tie-Down, Aircraft Securing Fitting
Shown on Left with Tri-metallic Weld Transition Ring and Drain Holes

For Aluminum (with tri-metallic ring) or Steel Deck (without) Installation

New style (type 14 and 18) are required for all US Navy Retrofits.
The new style is more robust compared to the old style and will have a longer service life.

Part Numbers:
Type I / Type 1 - Old Style - Steel Deck
Type XIV / Type 14 - New Style - Steel Deck
Type XVII / Type 17 - Old Style - Aluminum Deck
Type XVIII / Type 18 - New Style - Aluminum Deck

For quotations please provide:
Quantity Needed
Part Number


See Concrete Embedded Tie Downs Here

This catalog page contains:

aircraft securing, marine ship aircraft securing, helicopter tie down, NAVSEA Drawing 803-1916300, type I tie down, type XIV tie down, type 1 tie down, type 14 tie down, type XVII tie down, type 17 tie down, type XVIII tie down, type 18 tie down, helicopter tie down in aluminum deck, aircraft tie down in aluminum deck, airplane tie down, jet tie down, navy aircraft tie down, navy helicopter tie down, type 1 aircraft tie down, type 14 aircraft tie down, type 17 aircraft tie down, type 18 aircraft tie down,

SINCE 1985