3" waterway manual and gear driven monitors are corrosion resistant brass construction and are ideally suited for harsh, corrosive environments such as Marine Docks, Process Areas, and Offshore installations. They are operated in both horizontal and vertical planes and are capable of flows up to 1250 GPM. Note: Units with larger flows available by special order.

P/N   CM-1250M-3 and *CM-1250M-4

• Rattlers are low profile brass monitors with a 3" waterway. These units are capable of flows up to 1250 GPM, adjustable in both the horizontal and vertical planes. Stainless ball bearings at all rotation joints with 3" flange inlet and 2^1/2" male NST discharge outlet. Vertical travel is controlled by an adjustable hand wheel with worm gear drive.
  
  *NOTE:  Available with 4" flange inlet
   

P/N   CM-1250B-3S and *CM-1250B-4S

• The Brahma series are manufactured in corrosion resistant brass construction. Suitable for Marine, Offshore, Industrial or other corrosive environment.
  
• Designed with 3" waterway with water flows up to 1250 GPM with a 3" flange inlet and 2^1/2" male NST outlet. Stainless ball bearings at all rotation joints. Vertical and horizontal travel is controlled by an tiller bar. 360 degree rotation with positive lock.
  
  *NOTE:  Available with 4" flange inlet