Pacific Marine & Industrial Logo
Pacific Marine & Industrial®       
 MANUFACTURING ◊ DISTRIBUTION ◊ SERVICE
 
Contact Information    Search Site  ◊  info@PacificMarine.net
 
 

How PM&I Can Help Prevent Delays

Marine Oil Water Separators

Specification Sheet

marine oil water separator
 
Specifications

2 GPM

5 GPM 10 GPM

25 GPM

45 GPM
Height (inch/cm) 48(122) 56(142) 72(183) 74(188) 80(203)
Width (inch/cm) 26(66) 28(71) 36(91) 40(102) 54(137)
Depth (inch/cm) 42(107) 46(117) 60(152) 78(198) 96(244)
Dry Weight(lbs./kilogram) 700(318) 850(386) 1500(680) 2500(1135) 4000(1816)
Capacity gpm (M3/hr) 2(.45) 5(1.13 10(2.27) 25(5.68) 45(10.22)
Activated Carbon Media charge (lbs./kg) 60(27) 110(50) 250(114) 500(227) 1000(454)
Organoclay/Sand charge (lbs./Kg) 92(42) 185(84) 365(166) 730(331) 1500(662)
Pipe connections In/Out ¾" – ¾" 1" – ¾" 1 ½" – 1" 1 ½" -1 ½" 2" – 1 ½"
    
 
For all units:
Specifications Value
IMO MEPC Compliance 107(49)
Test PSIG 45
Operating Pressure 15 PSIG
Operating Temp Range 5-60 C
Max Free Oil Concentration 35%
Max Fluid "C" Oil Concentration (with filter) 6%
Oil in Water Discharge with TPH <15 ppm
Single Phase Power Options 110/120vac 220vac
Three Phase Power Options 210/220vac 380/415vac 460/480vac 575/600vac
DC Power Options 12 or 24
Frequency 50 or 60 Hz
Max Amperage

< 15 amps

Max Turbidity for Accurate TPH Reading 35 NTU
Design Negative Inlet Head (Ft/M) 9 (2.8)
Positive Inlet Head Design Pressure (Motorized Valve Req'd) 15 PSIG
Level Sensor Conductance
Pump Centrifugal w SS Housing
Coalescing Media Polypropylene/HDPE
Hazardous Area Classification Nema 4X or Class I Div II
Coating Specification Epoxy/Urethane
Piping and Manual Valves Bronze / Red Brass
Vessel Metallurgy Marine Coated Carbon Steel

Home ] Up ] 2 GPM Oil Water Separator ] 2.2 GPM-Y Oil Water Separator ] 5 GPM Oil Water Separator ] 10 GPM Oil Water Separator ] 25 GPM Oil Water Separator ] 45 GPM Oil Water Separator ] [ BOSS Sepecification Sheet ] How the Separator Works ]

   
California ◊ Florida ◊ Shanghai ◊ Germany
Lagos Nigeria ◊ Valparaiso Chile ◊ Dubai UAE
Trusted Since 1985
   
      World Wide Community Servicec  Project List PM&I
  
Pacific Marine & Industrial is
a registered service mark of:
  
Quality Pacific Manufacturing, Inc.
Copyright 1985-2017
 All Rights Reserved