Pacific Marine & Industrial Logo
Pacific Marine & Industrial®       
Contact Information    Search Site  ◊

How PM&I Can Help Prevent Delays

Spinner II Oil Centrifuge

Model 3600

Spinner II TF Hudgins Model 3600
Up to 16 GPM or 60.6 Liters Per Minute
Re-Useable Rotor
Paper Insert to Assist in Cleaning
With or Without LCB*
Up to 6,000cc of Contaminants
*The LCB is the Level Control Base
The LCB allows for parallel or slightly uphill oil return to the sump.
 It also allows for a much smaller return line.
The LCB requires a compressed air sources for operation.
Product should be sized to circulate oil sump 4 to 5 times per hour.
Model 3600 Spinner II Manual and Parts List
Model Application Guide
How Spinner II Works
Flow Path
Spinner II Installation Photos - Various Applications
Application Case Studies - Spinner II
Centrifugal Oil Purification System - Removes Particles Down to .1 Micron
Extends Oil Change Interval - Extends Engine Life
Operates on engine oil pressure
For: Engine lubricants, gear oils, machining fluids, hydraulic oils, quench oils
Engine mounted or side mounted
Operates on oil pressure only
Remove particles down to 1/10 of a micron
Remove carbon and soot
Use in addition to your full flow filter system
Stand alone pump assisted units available
Protects Machinery:
Reduces wear up to 50%
Increases engine / component life
Helps reduce frequency of maintenance and repair
Extends Operating Intervals
Keeps fluids and additives effective longer
Prolongs full flow filter life
Centrifuge requires minimal service
Eliminates Waste
Permanent, cleanable and reusable
No media or filter element to replace
Protects the environment by reducing disposable waste
spinner ii tf hudgins dirty bowl sample
Sample of Dirty Spinner Bowl
Remove particles down to .1 micron

Home ] Up ] Model 25 Spinner II ] Model 936 Spinner II ] Model 560 Spinner II ] Model 596 Spinner II ] Model 996 Spinner II ] Model 200 Spinner II ] Model 3400 Spinner II ] [ Model 3600 Spinner II ] Spinner II Parallel Systems For Larger Flow Rates ] How Spinner II Works ] Spinner II Flow Path ] Model Application Guide ] Spinner Installation Photos ] Spinner II Application Case Studies ]

California ◊ Florida ◊ Shanghai ◊ Germany
Lagos Nigeria ◊ Valparaiso Chile ◊ Dubai UAE
Trusted Since 1985
      World Wide Community Servicec  Project List PM&I
Pacific Marine & Industrial is
a registered service mark of:
Quality Pacific Manufacturing, Inc.
Copyright 1985-2018
 All Rights Reserved