Pacific Marine & Industrial Logo
Pacific Marine & Industrial®       
 MANUFACTURING ◊ DISTRIBUTION ◊ SERVICE
 
Contact Information    Search Site  ◊  info@PacificMarine.net
 
 

How PM&I Can Help Prevent Delays

Spinner II TF Hudgins

Oil Centrifuge

Model Application Guide
   
How Spinner II Works
   
Flow Path
   
Spinner II Installation Photos - Various Applications
   
Application Case Studies - Spinner II
   
How to Size: Recirculate Your Oil Sump 4 to 5 Times Per Hour
   
Spinner II Model 25 TF Hudgins Spinner II Model 936
Spinner II Model 25 Spinner II Model 936 Spinner II Model 560
Flow .8 GPM / 3 LPM Flow 1 GPM / 3.8 LPM Flow 2 GPM / 7.6 LPM
Re-Useable Rotor Re-Usable Rotor Disposable Rotor (No Bowl Cleaning)
No Paper Insert  Paper Insert to Assist in Cleaning With or Without LCB
   Up to 250cc of Contaminants Up to 360cc of Contaminants Up to 500cc of Contaminants
        
Spinner II Model 596 TF Hudgins  Spinner II Model 996 TF Hudgins Spinner II TF Hudgins Model 200
Spinner II Model 596 Spinner II Model 996 Spinner II Model 200
Flow 2 GPM / 7.6 LPM Flow 2 GPM / 7.6 LPM Flow 4 GPM / 15.1 LPM
Disposable Rotor Re-Useable Rotor Re-Useable Rotor
No Bowl Cleaning Needed Paper Insert to Assist in Cleaning  Paper Insert to Assist in Cleaning
With and Without LCB Up to 900cc of Contaminants With or Without LCB
Up to 500cc of Contaminants   Up to 2,000cc of Contaminants
        
Spinner II TF Hudgins Model 3400 Spinner II TF Hudgins Model 3600 Spinner II TF Hudgins Parallel Systems
Spinner II Model 3400 Spinner II Model 3600 Spinner II Parallel Systems
Flow 8 GPM / 30.3 LPM Flow 16 GPM / 60.6 LPM Larger Flow Rates
Re-Useable Rotor Re-Useable Rotor  
 Paper Insert to Assist in Cleaning  Paper Insert to Assist in Cleaning  
With or Without LCB With or Without LCB  
Up to 4,000cc of Contaminants Up to 6,000cc of Contaminants  
 
Centrifugal Oil Purification System - Removes Particles Down to .1 Micron
Extends Oil Change Interval - Extends Engine Life
 
Operates on engine oil pressure
 
For: Engine lubricants, gear oils, machining fluids, hydraulic oils, quench oils
 
Engine mounted or side mounted
Operates on oil pressure only
Remove particles down to 1/10 of a micron
Remove carbon and soot
Use in addition to your full flow filter system
Stand alone pump assisted units available
 
Protects Machinery:
Reduces wear up to 50%
Increases engine / component life
Helps reduce frequency of maintenance and repair
 
Extends Operating Intervals
Keeps fluids and additives effective longer
Prolongs full flow filter life
Centrifuge requires minimal service
 
Eliminates Waste
Permanent, cleanable and reusable
No media or filter element to replace
Protects the environment by reducing disposable waste
   

Home ] Up ] Oil Centrifuge Purification System ] Oil Filter Coalescer Purification System ] [ Spinner II Oil Filtration ] Duplex Oil Filters ] Nugent Oil Filter Parts ]

   
California ◊ Florida ◊ Shanghai ◊ Germany
Lagos Nigeria ◊ Valparaiso Chile ◊ Dubai UAE
Trusted Since 1985
   
      World Wide Community Servicec  Project List PM&I
  
Pacific Marine & Industrial is
a registered service mark of:
  
Quality Pacific Manufacturing, Inc.
Copyright 1985-2017
 All Rights Reserved