PM&I Logo - Pacific Marine & Industrial
PACIFIC MARINE & INDUSTRIAL ®      
 
MANUFACTURING ◊ DISTRIBUTION ◊ SERVICE
 

Sewage Lift Station

Marine Sewage Treatment

 
Store marine sewage for later disposal
Pump out through SCP-1000 Macerator Pump
Storage tanks provided with pump and controls or obtained locally.
Optional float switch package for automatic operation.
Typical / Example Installation Drawing
 
SCP-1000 Macerator Pump
Pump Diagram and Parts Pump Performance
 
This is the highest quality macerator pump built.
 
Specifications:
Silicon Bronze Cast
14" length (without motor and coupling)
3" inlet and 1 1/4" outlet
 
Cutting Blades:
17-4 PH Stainless Steel (special hardened material) Blades and Cutters
One stationary and 2 rotating blades reduce solids to between 1/8" and 1/16"
 
The oil lubricated duplex ball thrust bearing is held in an adjustable cap so that the axial cutter and
cutter ring axial clearance can be adjusted from the outside without the use of shims.
 
Shaft Seal:
Sealed by a forced oil lubricated mechanical seal.
 
Seal Flush System:
Allows pressurized water to flush the pump seal cavity via a solenoid valve during operation.
 
Motor and Coupling:
Flexible coupling with one of the following
2 HP Motor at 3450 RPM (145TC TEFC)
1 HP Motor at 1725 RPM (145TC TEFC)

Home ] Up ] Marine Sewage Treatment ] [ Sewage Storage and Lift Station ] marine-vacuum-sewage-system ]

TRUSTWORTHY GLOBAL TECHSUPPLY
 
 
PACIFIC MARINE & INDUSTRIAL
is a registered service mark of:

QUALITY PACIFIC MANUFACTURING, INC
Copyright © 1985-2014
All rights reserved.
Version 2.24