Pacific Marine & Industrial Logo
Pacific Marine & Industrial®       
Contact Information    Search Site  ◊

How PM&I Can Help Prevent Delays

Wire Rope

Parallel Laid Rope


The Parallel Laid Rope is one manufactured to form linear contact between stands by winding all wires at the same pitch.


The linear contact between wires of each layer causes the abrasion between wires to be low

There is less variation in product because each layer is twisted with linear contact.  There are no hollow sections.

The breaking load is higher than Cross Laid Ropes of the same size because the effective cross section is higher.

It is more stiff compared to Cross Laid Rope. (flexibility is low)

Common Application: Cranes

Select the product below to see performance charts:
6 X S19 6 X S19 IWRC 6 x W19
6 X W19 IWRC 6 x Fi25 6 x Fi25 IWRC
6 X Fi29 6 x Fi29 IWRC 6 x WS26
6 x WS26 IWRC 6 x WS31 6 X WS31 IWRC
6 x WS36 6 X WS36 IWRC 6 x WS41
6 x WS41 IWRC 6 x SeS37 6 x SeS37 IWRC
Wire Rope Selection Assistance
Working Load Limit, Breaking Strength and Safety Factor: Choose Wire Rope

Home ] Up ] Cross Laid Rope ] [ Parallel Laid Rope ] Non Rotating Rope ] Single Rope ] Compacted Rope ] Filling Type Rope ] Filling Type Compacted Rope ] Swaged Rope ] Cable Laid Rope ] Choose Wire Rope ]

California ◊ Florida ◊ Shanghai ◊ Germany
Lagos Nigeria ◊ Valparaiso Chile ◊ Dubai UAE
Trusted Since 1985
      World Wide Community Servicec  Project List PM&I
Pacific Marine & Industrial is
a registered service mark of:
Quality Pacific Manufacturing, Inc.
Copyright 1985-2017
 All Rights Reserved