PM&I: Catalog of Slab Type Castings: Cast Frames, Lids and Grates: R-6665-2 to R-6665-3 Series

PACIFIC MARINE & INDUSTRIAL

Engineering Department Email:

Slab Type Castings
R-6665-2 to R-6665-3 Series

Slab Type Manhole Frames with Bolted, Gasket-Sealed Lids

Heavy Duty Square and Rectangular

Square and rectangular sizes in this series are furnished standard with countersunk stainless steel hex head cap screws, flat neoprene gasket, Type G waterproof lift handle and, when so indicated, Type R stainless steel butt hinge.

The specific location and number of hinges, handles, and pickholes on these units may vary depending on the size and shape of the lids, and may not be exactly as illustrated. If the location and number of hinges, handles, or pickholes is critical on your particular project, please specify requirements.

Note: Some heavier lids may have bottom ribs that extend below the base of the frame. If this would cause a problem in your installation, advise when ordering.

Units are shipped assembled with gasket glued to frame.

Dimensions in inches
Catalog No.	Catalog No.						No. of	Frame
Not Hinged	Steel Butt Hinge	A	B	C	E	F	Bolts	Type
Square
R-6665-2AP	R-6665-2AH	12 1/4 x 12 1/4	1	111/2 x 11 1/2	15 x 15	6	4	Y
R-6665-2BP	R-6665-2BH	133/4 x 133/4	1 1/2	12x 12	18 x 18	4	4	W
R-6665-2CP	R-6665-2CH	18 x 18	1 1/2	16x 16	22x22	4	4	W
R-6665-2EP	R-6665-2EH	20 x20	1 1/2	18 x 18	24 x24	4	4	W
R-6665-2GP	R-6665-2GH	211/2 x211/2	1 1/2	20 x20	26x26	4	4	W
R-6665-2HP	R-6665-2HH	23 1/2 x23 1/2	1 1/2	21 x21	28 x28	4	8	W
R-6665-2JP	R-6665-2JH	251/4 x251/4	1 3/4	22 x22	311/2 x311/2	4	8	Y
R-6665-2KP	R-6665-2KH	25 3/4 x25 3/4	1 1/2	23 x23	30x30	4	8	W
R-6665-2LP	R-6665-2LH	27 x27	2	24 x24	33 1/2 x33 1/2	4	8	Y
R-6665-2MP	R-6665-2MH	27 1/2 x27 1/2	1 1/2	25 x25	32 x32	4	8	W
R-6665-2NP	R-6665-2NH	291/2 x291/2	1 1/2	27 x27	34 x34	4	8	W
R-6665-2OP	R-6665-2OH	30 x30	1 3/4	27 x27	34 x34	4	8	Y
R-6665-2PP	R-6665-2PH	311/2 x311/2	1 1/2	29 x29	37 x37	4	8	Y
R-6665-2RH
R-6665-2RP
R-6665-2TP	R-6665-2TH	50x 50	1 1/2	47x 47	56x 56	4	16	Y
Rectangular
R-6665-3AP	R-6665-3AH	14 x20	1 1/2	11 x 17	18 x24	4	6	W
R-6665-3BP	R-6665-3BH	13 1/2 x251/2	1 1/2	11 x23	18 x30	4	6	W
R-6665-3CP	R-6665-3CH	19 1/2 x251/2	1 1/2	17x23	24 x30	4	8	W
R-6665-3DP	R-6665-3DH	19 1/2 x311/2	1 1/2	17x29	24 x36	4	8	W
R-6665-3E1P	R-6665-3E1H	20 x 44	1 1/2	17x 41	24 x 48	4	10	Y
R-6665-3EP	R-6665-3EH	19 3/4 x373/4	1 1/2	17x35	24 x 42	4	10	W
R-6665-3FP	R-6665-3FH	22 x32	1 1/4	19 x29	26 x36	4	8	Y
R-6665-3HP	R-6665-3HH	26 x32	1 1/2	23 x29	30 x36	4	8	Y
R-6665-3JP	R-6665-3JH	251/2 x37 1/2	1 1/2	23 x35	30 x 42	4	10	W
R-6665-3KP	R-6665-3KH	25 3/4 x 49 3/4	1 1/2	23 x 47	30x 54	4	12	W
R-6665-3NP	R-6665-3NH	311/2 x 49 1/2	1 1/2	29 x 47	36x 54	4	16	W
R-6665-3O1P	R-6665-3O1H	38 x 50	1 1/2	35 x 47	44 1/2 x 56 1/2	4	14	W
R-6665-3OP *	R-6665-3OH *	36 x60	1 3/8	33 x 57	40x64	6	16	Y
*Frame in sections bolted at corners.

Free Open Area Tables

To Calculate Drainage Water Flow

Listed by Product Number

SINCE 1985