| Cable Loop Drive |
 |
|
Model LD100AB |
|
|
|
LD100AB Drawing |
|
|
|
Features: |
|
Worm and worm gear drive for positive load holding |
|
Improved dynamic braking and brake motor |
|
Single phase motor |
|
Grooved drums for 1/4" cable |
|
Low voltage pendant control |
|
|
|
Power: |
|
Universal high speed reversible brake motor 1.25 HP |
|
6 amp no load |
|
15 amp full load |
|
15 foot power cord |
|
115 Volts AC |
|
|
|
Speeds: |
|
59 RPM - no load on drum |
|
37 feet per minute - 10,000 lbs. rolling load |
|
31 Feet per minute - 20,000 lbs. rolling load |
|
|
|
Duty Cycle: |
|
25% - 15 minutes per hour continuous operation |
|
|
|
Pulling Capacity: |
|
20,000 lbs. rolling load capacity |
|
800 lbs. line pull |
|
Rolling load capacity is dependant on floor surface and wheel / caster
condition |
|
|
|
Shipping Wt: |
|
102 lbs.
|
|
|
|
Cable Capacity: |
|
Recommended 1/4" diameter cable has 7000 lbs breaking strength |
|
Safe working load is 1400 lbs. |
|
|
|
Factory Installed Options: |
|
230 volt single phase motor |
|
Freewheeling clutch |
|
Limit switch |
|
Emergency hand crank |
|
Variable speed control |
|
Radio remote control |
|
High speed gears |
